To resync your Wireless Remote Controller or sync a new remote with your trailer dolly, follow this simple procedure:
- Turn the controller on. From this point, you will have 30 seconds to complete the syncing process.
- Pull the red battery disconnect switch on the module to the out position to connect your batteries to the circuit.
- Push and hold the dolly’s power button for 10 seconds. The blue LED will turn on after about 1-2 seconds. Continue to hold the button until the LED turns red. The wireless receiver is now in "sync" mode.
- The speed mode buttons on the controller will flash in an alternating pattern to show confirmation that the controller has connected to the dolly.
- Press the joysticks to engage the motors and begin moving the dolly.
Mar 7, 2025